• teensy 3.2 not detected as serial device using KEIL
    I am using teensy 3.2 to program its K20 series microcontroller Mk20DX256 I have written a simple UART code to transmit a character 'U' from teensy to PC and see it on Docklight.I have disabled interrupt...
  • NXP Kinetis MK20X256VLH7 (Teensy 3.2 Microcontroller) - RTE_Device.h Issues
    Hi, i'm working in Keil with the NXP Kinetis MK20X256VLH7 (Teensy 3.2 microcontroller). The microprocessor seems to get stuck when i wrote to these registers: PORTB->PCR[16] = (uint32_t)(PORT_PCR_MUX...
  • read voltage on pin mcb2300
    Dear All, I have a mcb2300 board with LPC2378. I want to read the voltage with Test Multimeter from PIN0.0. I read from Document that this pin corresponds to the PIN 66 on the board. So I set pin...
  • Maximum Negative voltage to gpio pin
    I am using lpc2378 .I use zener diode for one application.It gives -0.8v pulse for some time. can it damage the gpio pins. What is maximum negaive voltage which we can apply to gpio pin.
  • License or Patch problem on Keil Uvison 3.2
    Hi, We are not able to compile the code which we are able to compile on other system, It is giving the following error Error 6286E: Value(0x299d0) out of range (0 - 0xfff) for relocation #0(R_ARM_LDR_PC_GO...