• NXP IRD FOR LPC2468
    Is there anyone able to program the NXP IRD for LPC2468 with the ULINK2? It has only internal flash and internal ram. So, I thought I can just set it up defalt with the LPC2000 IAP2 512K FLASH in...
  • FreeRTOS with NXP LPC2468 and Keil
    Hello at all, I want to use FreeRTOS with the NXP LPC2468. On the website http://www.freertos.org exists only an example with the LPC2129 and Keil (look here " www.freertos.org/index.html ://interactive...
  • Isochronus Usb Device in LPC2468
    Hi Techies, Presently we are working on LPC2468 OEM Board for isochronus transfer in USB Device. Can anybody exaplains the hardware behaviour(Registers use) with isochronus data transfer for IN and...
  • LPC2468 : Difference between LPC23xx.H and NXP doc
    Hi, When programming the SDRAM configuration, I remark a difference between LPC23xx.H and the NXP user.manual.lpc24xx with the addresses of EMC_DYN_CFGn and EMC_DYN_RASCASn registers. For example...
  • NXP LPC2468 Does not always enter bootload mode
    We have a mature product in production using the NXP LPC2468. We bring the first UART out to an RS-232 driver along with RESET and the pin for the on-chip bootloader. On a PC, an FTDI cable for RS-232...