• contents mismatch
    Hello, I have a lot of errors during programming the AT91SAM9260 (external NOR flash) e.g. 0x10000000H contents mismatch at (Flash=FFH) (Required=18H) I use NCS0 from the controller...
  • memory mismatch
    im trying to debug for the first time but i get this error: ULINK- ARM Error Memory Mismatch! Address: 0x00000344 Value: 0x10 Expected = 0x18 what does this error mean and how can i fix...
  • I/O Port Simulation mismatch?
    I have two simple code examples: ; Example 1 ORG 0 MOV A,#0xff MOV P0,A TOP: MOV P1,P0 SJMP TOP END ---------------------- ; Example 2 ORG 0 TOP: MOV A,#0xff MOV P0,A MOV P1,P0...
  • address mismatching problem
    hi i am getting address mismatch error while starting debug session and the program cannot be downloaded to the flash memory. I am using MCP2140 as the target board. The messege is as mentioned underneath...
  • Device signature mismatch in MCB2300
    Hi we are facing problem while erasing the flash using serial port in MCB2300. Flash Magic version is 3.59.227 Jumpers J10: ON Jumpers J13: OFF Jumpers J4: ON any a operation of the follows...