• ULINK - "Memory Mismatch!"
    When i compile my code in the uvision3 and try to Debug i get the message: Memory Mismatch! Address: 0x00000018 Value = 0x18 Expected = 0xF0 This address corresponds to the code LDR PC, ...
  • Memory mismatch in Flash downloading
    Hi all , I am using the Easyweb example program provided in Keil uvision3 for phytec board under c:\Keil\ARM\Boards\Phytec\LPC229x\. I tried to download the program to the flash memory in the board...
  • Memory Mismatch during Debug
    Hi.. I have been working on Keil UVision4. I have written a code and it got compiled well. Now when i start debugging the code it says there was a memory mismatch at a address and the value at that...
  • Memory mismatch when starting debug
    Hi, I develop the board with STR912FAZ44H6. The software I use is keil MDK 3.4. It works fine. After I replace STR912FAZ44H6 with STR912FAW44X6, I can download the program and the new board runs...
  • contents mismatch
    Hello, I have a lot of errors during programming the AT91SAM9260 (external NOR flash) e.g. 0x10000000H contents mismatch at (Flash=FFH) (Required=18H) I use NCS0 from the controller...