• LPC812 bootloader
    I'm using a lpc812 to make a bootloader. The boot design is mapped 0x0000 to 0x1000 flash. The application is mapped 0x1000 to 0x3FFC flash. I program the application and boot with the Flash magic...
  • Debugging LPC812 Cortex m0 MCUs
    Hi is this possible to debugging applications on this MCU?has any one experiences with this?As Datasheet says it is possible to debugging in SWD mode but with JLINK /Keil we had no success. I used...
  • simulation
    Hi, I have created a small project for spansion MB9AF312K. In short, on SW1 button press(P0f/NMIX), it creates an interrupt, an NMI and lights an LED(inside NMI_Handler) .I would like to debug it using...
  • SIMULATION
    Hello, I have a problem simulating the ADuC7026's bau rate generation, I'd configured the UART to operate at 9600 bps, but when I debugged it says that generates 4800 bps... What I'm Doing Wrong? ...
  • Simulation
    Dear Sir/Madam, We are working for a simulation projec for arm processor for lpc2148. As we have not simulation experience can u please guide us in the simulation for the peripherials like spi, i2c,...