• SPI Clock issue of SPI with LPC2378
    Dear Sir, On Simulation a proper SPI clock is generated but in actual noisy clock is observed on CRO 1)Clock signal should be in square wave form? So if so for what reason noisy clock is seen on CRO...
  • ADUC7020 SPI issue
    Hello, I encounter issue using the aduc7020 in spi slave mode. I am implementing a spi driver in assembler by polling the SPISTA register status and with a clock parity and clockphase set to 1. ...
  • STM32F103 AT45DB321D SPI issue
    Processor – STM32F103ZE HCLK – 24MHz PCLK2 – 24MHz Serial Flash – AT45DB321D STM32 Standard Peripheral Ver 3.1.2 I am having an unusual issue working with serial flash. I am able to read and...
  • SPI bit Banging issue
    hi in my recent project i'm doing bit banging SPI in AT89S52 . i am using a self modified library and its not working properly. i cant remember the original page where i found the code, though it was...
  • SPI issue on LPC936
    I'm having a problem with the SPI bus on a LPC936 maybe someone can help. Whenever I try and send date the clock signal is there but the MOSI pin is just logic low the whole time. The port pins...