• lpc23xx, capacitor on reset pin
    Hi I am having start up problems with lpc23xx devices. i.e sometimes the CPU does not start my code when power is connected I activated brown out by changing PCON register and the situation got better...
  • connect reset pin µC with reset-pin from ext. flash
    Is it a good way or important (necessary) to connect the reset pin from the external flash with the reset pin from the microcontroller? e.g. if you program your external flash via jtag? Or is...
  • 89LPC932 Reset Pin
    Hi, I want to use the reset pin on the LPC932. This pin (P1^5) will reset the micro after bringing it low. My question is about the procedure. 1. I write a 1 (high) to this pin (reset). 2. Then I put...
  • Enable Reset Pin
    Hi, When I program the chip, I set 8MHz internal clock and Disable RESET pin (as PORT3.6) using the function DISABLE_RESET. The program is running well, but when I want to reprogram again, I can...
  • AT89C51ED2 Reset pin is latched up to high state
    Dear Friend, I am using a 64 pin VQFP AT89C51ED2 which has been mounted on a VQFP to DIP pcb. I observe at power up, the reset pin is latched up to high state. Wiring conditions are :Vcc=5V, Gnd, EA...