• Sharing variable (struct) in Bootloader with Application
    I am wanted to write a bootloader. If an application is already programmed, it transfers control to the bootloader with an interrupt call (_trap_0x7F). The bootloader needs several informations form the...
  • Bootloader in same Flash as application?
    Is it possible to have a separate bootloader and application in the same flash? The problem I see is hooking the interrupts from the low memory (the bootloader's to go into 0x0000)into the application...
  • Debugging bootloader + application ?
    Hello, I have a question on how to debug an application that consists of two separate projects - namely a bootloader+firmware upload part and the actual application - that runs on an ADuC845. The...
  • LPC17xx bootloader jump to application
    Hello, I'm working on a bootloader for the lpc1754. This bootloader downloads an application to flash (address 0x6000). When download is succesfull, it has start the new software from address 0x6000...
  • Bootloader to Application switching troubles ....
    Hello, I have a home-made bootloader on a lpc2378 that upgrade the firmware from a SD card. It works well except there's some troubles that appears when the application is launched. The interrupt...