• at91sam9263 debug problem
    Hello, I have problem with debugging at91sam9263... When start debugger i cannt see peripherial registers- there is only "Reset" position. What is wrong?
  • Truoble with AT91SAM9261 bzw. AT91SAM9263
    Hi, for a new project i want to use AT91SAM9263-EK or AT91SAM9261-EK. I can compile Demoprojects (c:\keil\....) without any errors and download the programm to internal ram and start the debug session...
  • Booting AT91SAM9263 from NOR flash
    Hi, Maybe, I've the same problems described in this thread http://www.keil.com/forum/docs/thread13351.asp. It would be perfect if you could give me some hints and your modifications in the startup...
  • ARM9 Boot- Booting AT91SAM9263 from NOR-Flash
    Hi, i use a AT91SAM9263 and i will boot it from nor-flash. At boot time i must switch the master clock at a higher frequency. This switch can’t be performed from NOR flash, as the access timings to...
  • Keil debugging run problem
    I am working on lpc 1768 on keil version 5, after building the code when i go to debug using simulation option and run the code(using F5) the stop watch t1 which is in left bottom corner of debug window...