Browse By Tags

  • First compile, verilog files missing

    Hi,

    I am just performing the first steps with the DesignStart Eval Edition (Cortex-M0), trying to compile the verilog sources to get a simulation running.

    So I changed /systems/fpga_testbench/trl_sim/makefile to use gcc and modelsim and now I want to …

  • ARM CortexM3 Designstart on the fpga can't run the compiled c code itself

    Dear all

    I encounter a confusion that  I compile a piece a c code and generate HEX file( as instruction rom's initialization file) which is download to the fpga whit the cortex m3 prototype of Verilog code .but the M3 system can't run itself .when I…

  • SWD issue in Cortex-m0

    We are using Cortex-M0 DesignStart Pro to design MCU. When we use SWD to download grogram to flash in FPGA(Cortex_m0 mcu inside),  we cannot to connect keil with FPGA, and Keil shows:" Could not stop Cortex-M device!Please check the JTAG cable. "…

  • External BRAM as I/D memory for Cortex-M1 DesignStart package for Xilinx FPGAs

    Hi,

    I'd like to try and use external BRAM as the I/D memory for the Cortex-M1 DesignStart package for Xilinx FPGAs. The reference examples for Arty boards use the internal TCMs.

    I've built a design in Vivado with a BRAM connected to the AXI3 port mapped…