Browse By Tags

  • Cortex-M0 DesignStart processor size (FPGA)?

    Dear sirs,

    I have a question about the size of synthesized logic for Cortex-M0 DesignStart processor.

    When I use ISE of Xilinx to synthesize Cortex-M0 DesignStart processor (version r1p0-00rel0), I have result as below.

    (I configure for using Spartan…

  • I am an FPGA SoC engineer and I want to create a custom SoC. Is it possible for me to learn and acquire the development flow for less than 5K EUR budget – and if so, how should I proceed?

    This question was raised in the ‘Want to maximise your product design? See how a custom ASIC can help?' webinar, view all the questions in the round-up blog post.

  • Assuming knowledge of standard off-the-shelf SoC and FPGA designs, what big challenges exists for an integrated solution?

    This question was raised in the ‘Want to maximise your product design? See how a custom ASIC can help?' webinar, view all the questions in the round-up blog post.

  • Could you recommend a specific FPGA board for ARM Cortex-M0 and Cortex-M3 implementation?

    This question was raised in the webinar "Enhance your product with industry-leading processors - for no upfront license fee.”

  • The Cortex-M0 and Cortex-M3 processors are free for FPGA prototyping, but are they also free for IC prototyping?

    This question was raised in the webinar "Enhance your product with industry-leading processors - for no upfront license fee.”

  • Cortex M0 Designstart missing/unknown files and ignored includes

    Hi everyone,

    I'm using Windows 10 operating system(i couldn't know if this is relevant to second part of my problem) and I want to embed Cortex M0 Designstart Design Kit on a Xilinx FPGA board. I'm currently trying to synthesize (AT510) r1p0-00rel0…

  • Has anyone had problems with implementing App Note AN387 using Cortex M0 r2p0 on a Cortex-M + dev board?

    All,

    I received the Versatile Express Cortex-M Prototyping System + and am using DesignStart. I powered on the board and the operating system booted up without any problems.

    In the V2M_MPS2/MB/HBI0263C/board.txt file, the following are the sequence of…

  • Simulate Cortex-M0 FPGA implementation in ModelSim

    Hello, I started to tinker with the most basic Cortex-M0 from the DesignStart.
    I am using Modelsim Student Edition, which run only on Windows (or Linux through Wine).

    I tried to start with Linux to see if at least the "make" commands are working. Problem…

  • First compile, verilog files missing

    Hi,

    I am just performing the first steps with the DesignStart Eval Edition (Cortex-M0), trying to compile the verilog sources to get a simulation running.

    So I changed /systems/fpga_testbench/trl_sim/makefile to use gcc and modelsim and now I want to …

  • Cortex-M0 DesignStart Eval

    Hi

    I have download the Cortex-M0 DesignStart Eval file (AT510-MN-80001-r2p0-00rel0),
    and read the ARM FPGA board (MPS2+) datasheet.

    The MPS2+ have many peripheral devices but we don't need it,
    so we want made a platform for our use.

    The user guide…

  • M0: remove PMU/CG

    Hi,

    I am using Cortex-M0 DesignStart Pro. I want to port the Model to FPGA, where I do not need any clock gating or power management. Is there a way to remove the PMU completely?

    Best regards,
    LeChuck

  • SWD issue in Cortex-m0

    We are using Cortex-M0 DesignStart Pro to design MCU. When we use SWD to download grogram to flash in FPGA(Cortex_m0 mcu inside),  we cannot to connect keil with FPGA, and Keil shows:" Could not stop Cortex-M device!Please check the JTAG cable. "…

  • Xilinx FPGA Block ROM is used as FLASH and how to load the program in to this?

    Hi,

    I am using the SoC design from Desgn Start - Eval version for Cortex-M0 with only modification of using Xilinx Block ROM as the Memory for FLASH ROM as well as for RAM.

    And my goal is to load the application into the FLASH ROM (Xilinx Block ROM) using…

  • Cortex-M0 DesignStart ready for Altera FPGAs

    Hello together, I am little bit confused regarding to the Cortex-M0DS comparability to Altera FPGAs.

    On one hand, according to the information out of the white paper An introduction to ARM Cortex-M0 Design Start it must be possible to run the Cortex-M0…

  • Prototyping of ARM Cortex-M Processor systems in FPGA

    If you are a microcontroller / SoC / ASIC designer working on Cortex-M processor based systems looking for an FPGA board for prototyping, I have a great news for you: ARM has released a new FPGA board called the Cortex-M Prototyping System.

    Key featu…