Hi,
I want to buy a development board to improve my skills in embedded & analog electronics area.
I have a S3C2440 single board EM2440-III.
My problem is that when I insert sd card 4G or 8G into the board, it not detect sd card. I insert sd card 2G and work OK. please help me to solve the problem.
Hello, I am unable to find boards with R52, is there any board with public availability? I only found the NXP GreenBox (for approved customers) :/Thanks,Alessandro
What SBCs I need to choose?The Raspberry Pi 4 just launched in June, but we have known that many other SBCs have released recently. How should we choose the best SBCs for ourselves in these boards? Here enclose a spec-comparison table for those curious…
Hi
I am relatively new to arm and would like to ask your opinion on what board would be good for my project. I have mostly done C coding.
I have project where pulse length and voltage level needs to be measured and based on that stepper motor is driven…
Hi everyone,
I am using ETM v3.3 and ETB11 on Cortex-A8 to trace the execution of the applications. As the size of the ETB is normally very limited on the development boards, it always overflow in less than 1ms. After the overflow, we may loss some important…
Hi Experts,
Being an Linux and Android enthusiast I am always looking for the development boards to try something new in it.
I would like to hear upon Wandboard which uses iMX6 DL processor from freescale which seems to be at reasonable price.
Regards,
L…
Can I test specific android OS in the PC environment to change the middleware and other aspects of the build before testing it in the ARM based development boards.
techguyz
Hello together, I am little bit confused regarding to the Cortex-M0DS comparability to Altera FPGAs.
On one hand, according to the information out of the white paper An introduction to ARM Cortex-M0 Design Start it must be possible to run the Cortex-M0…
You may already know the Arm Musca-A, the first Platform Security Architecture (PSA) development platform with an Arm Cortex-M33 based subsystem, Arm TrustZone and reference architecture for Arm TrustZone-based systems. The board is a great tool to evaluate…
In response to our recently announced Wall of Boards at the ARM booth at Embedded World 2016, we had an inquiry from Twitter about the availability of ARM Cortex-R development boards.
Of all the ARM processors, the Cortex-R are probably the least known…
Freescale's booth at Maker Faire in San Mateo featured a large 4320 LED video panel, controlled by a single Teensy 3.1 board powered by Freescale's Kinetis K20 microcontroller (featuring an Arm Cortex-M4).
Erin Murphy, Paul Stoffregen and Robin…
Businesses increasingly recognise that you need to build technology solutions for IoT that have security…
Dear All,
I need suggestions on purchasing standard JTAG both 14 and 20 pin connector where I can connect the device to DS-5 to get the profile data.
Which JTAG connector can I purchase? What is the cost of it?
Thanks and Regards
Sridhar
Hi, I am working on ARM virtualization extensions. Is there a development board with ARMv7-A processor (virtualization extensions). Or I have to use OVP?
Hello There,
Recently I have bought Altera Cyclone V SoC 5CSXFC6D6F31C6 Development board and generate the license online.
license shows in Help-->License Manager with Green Check Mark , it seems that every thing is fine for further software development…