Browse By Tags

  • DesignStart Pro: APB on FPGA via Quartus Prime

    Hello,

    I try to implement the Cortex-M3 processor on an FPGA via Quartus Prime. I set up the SSE050 Subsystem and tried to connect several peripherals to the board. I want to test the functionality with a uVision project lighting some LEDs. To have access…

  • BME280 on DesignStart Eval via SPI Shield0

    Hello,

    I'm trying to connect the DesignStart Eval System to the BME280 Environmental Sensor via SPI. I used the SPI Shield0 Pins (EXP[11 to 14]) to set the connection and activated alternate functions in uVision for these pins. But how can I set up the…

  • Different Address of Reset Handler!

    Hi there,

    Why the address of reset handler is different from waveform and assembly code for hello testcase?

    This is obtained after compiling hello.c using Keil uVision 5.

    Reset_Handler
    0x000001c0: 4809 .H LDR r0,[pc,#36] ; [0x1e8] = 0x2a1
    0x000001c2:…