Browse By Tags

  • Fail to run the compiled MPS2+ project

    Hi,

    After compiling the MPS2+ FPGA designstart project (unmodified, as-is out of the box), i'm failing to run it on the FPGA.

    While the already downloaded image that arrives on the FPGA runs fine (i run the demo application), the image I compiled…

  • What USB Blaster cable?

    Hello,

    I want to use an USB Blaster cable for rapid FPGA prototyping on the MPS2+. 

    The cables differ very much in price.  Is it recommended to buy an original Altera for over 200 Euro or can I use a cheaper nonamee one?

    Could you please recommend a cable…

  • how to implement mbed_blinky example on mps+2 board ?

    hi, GUys

       i buy a mps+2 board  and try to implement  mbed_blinky examples. but i meet issues on debugger and download axf files.

         now i can:

            1. export mbed_blinky examples for keil 

            2. compile success and generate axf file

            3. download fail

    …

  • Hello, I am just getting started with design start and building a heterogeneous core SOC.

    I am new to design start. I have just received the MPS2 board. We have a multi core SOC design and I wanted to know hoe to  program the individual cores via .axf files.

  • Prototyping of ARM Cortex-M Processor systems in FPGA

    If you are a microcontroller / SoC / ASIC designer working on Cortex-M processor based systems looking for an FPGA board for prototyping, I have a great news for you: ARM has released a new FPGA board called the Cortex-M Prototyping System.

    Key featu…

  • BME280 on DesignStart Eval via SPI Shield0

    Hello,

    I'm trying to connect the DesignStart Eval System to the BME280 Environmental Sensor via SPI. I used the SPI Shield0 Pins (EXP[11 to 14]) to set the connection and activated alternate functions in uVision for these pins. But how can I set up the…

  • Test Errors with DesignEval Kit

    I am currently in Evaluation phase of ARM Design Kits.

    I am using the exact steps present in arm_cortex_m3_designstart_eval_rtl_and_fpga_quick_start_guide to compile the RTL and run the tests.

    But, unfortunately after compiling the RTL I am getting a stack…

  • Test Errors with DesignEval Kit (arm_cortex_m3_designstart_eval_rtl)

    I am currently in Evaluation phase of ARM Design Kits.

    I am using the exact steps present in arm_cortex_m3_designstart_eval_rtl_and_fpga_quick_start_guide_100895_0000_00_en.pdf

    to compile the RTL and run the tests.

    But, unfortunately after compiling the…

  • FAQ: Is Quartus Prime Partial Reconfiguration license required to customize/build Arm DesignStart FPGA image?

    Older versions of Cortex-M0 DesignStart required obtaining an Intel® Altera® Quartus Prime partial reconfiguration license. However this is no longer necessary with the latest DesignStart packages. See below for further information.

    Cortex-M0…

  • FPGA Prototyping walkthrough using Arm Cortex-M0 DesignStart and MPS2

    This article relates to AN387 Cortex-M0 DesignStart delivered with the MPS2 board.

    For Cortex-M0 DesignStart Eval (AT510) r2p0-00rel0, see the ”Arm Cortex-M0 DesignStart Eval FPGA Revision: r2p0 User Guide” document that is delivered as part of the AT510…