Hi,
I am using LPC2368. It has pretty complex code running with 1 Timer interrupt (100uS continuous) , 2 UART interrupts, 1 SPI Interrupt, 1 USB interrupt and main loop.
Watchdog timer is of 5 sec and is feed in main loop and in different places.
System…
Wenkwei asked: "with the M3 designstart CMSDK, is it possible to design multi-master bus? In the IoT Cortex-M TRM, only an ahb-lite structure is illustrated. That document does mention AHB and APB expansion through INTEXP[1:0] but what if there are more…
Hello,
I try to implement the Cortex-M3 processor on an FPGA via Quartus Prime. I set up the SSE050 Subsystem and tried to connect several peripherals to the board. I want to test the functionality with a uVision project lighting some LEDs. To have access…
I am just performing the first steps with the DesignStart Eval Edition (Cortex-M0), trying to compile the verilog sources to get a simulation running.
So I changed /systems/fpga_testbench/trl_sim/makefile to use gcc and modelsim and now I want to …
Cannot configure interupts of TIM6 on stm32f103 board
Does my NVIC configuration wrong?
Code:
@ stm32f103 timer & interrupt test by laper_s (from 2019-02-02) .thumb .cpu cortex-m3 .syntax unified .word 0x20005000 .word start + 1 b start…
Several people have asked me for the following paper I presented in Embedded World 2014:
ARM Cortex-M Processor based System Prototyping on FPGA
Many SoC designers need to design FPGA prototypes of Cortex-M series processor-based systems for…
The Cortex-M System Design Kit (CMSDK) is an extremely useful product for chip designers and FPGA designers working with the ARM Cortex-M processors. It contains a wide range of AMBA bus infrastructure components, example systems, example peripherals…