• State Accepted Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 25 subscribers
  • Views 761 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Morello Board does not appear to recognize Android-SWR USB

MartinHHiggins

Hi, I've followed the guide and flash acrossed the Android-SWR ISO to the USB. However when I try and boot the board from the USB is doesn#t seem to pick up the operating system. Getting the below UART output.

I haven't partitioned the SSD wondering if is the issue or related?

add-symbol-file /home/martin/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANG38/AARCH64/ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore/DEBUG/ArmPlatformPrePeiCore.dll 0xE000F800
add-symbol-file /home/martin/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANG38/AARCH64/MdeModulePkg/Core/Pei/PeiMain/DEBUG/PeiCore.dll 0xE0020240
add-symbol-file /home/martin/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANG38/AARCH64/MdeModulePkg/Universal/PCD/Pei/Pcd/DEBUG/PcdPeim.dll 0xE0033240
Loading PEIM at 0x000E0033160 EntryPoint=0x000E0033240 PcdPeim.efi
add-symbol-file /home/martin/bsp/uefi/edk2/Build/morellosoc/DEBUG_CLANG38/AARCH64/ArmPlatformPkg/MemoryInitPei/MemoryInitPeim/DEBUG/MemoryInit.dll 0xE0004240
Loading PEIM at 0x000E0004160 EntryPoint=0x000E0004240 MemoryInit.efi
Memory Init PEIM Loaded
remote-ddr-size property not found
ASSERT [MemoryInit] PlatformLibMemSoc.c(173): Status == 0