We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello,
I have a custom board which is using just 2 pins for the quad SPI flash, so I need to modify the flash driver for µVsion to download our firmware to flash. I am able to alter the runtime firmware to work with just these two pins on my eval board, but I can't download the code to our custom board, because the existing flash driver assumes normal quad operation.
I located the source for a similar driver (Keil_v5\ARM\Flash\MiMXRT105x_ATXP032), but it will require a lot of work to make it work for the 1060 processor and different flash part. Is it possible to get the source for:
\Arm\Packs\NXP\MIMXRT1062_DFP\16.0.0\arm\MIMXRT106x_QSPI_4KB_SEC.FLM? Who maintains that driver?
Thanks in advance!
- John
John, the corresponding Device Family Pack is provided by NXP. And as (atm) these Packs do not include the projects to generate the Flash Programming Algorithms, I recommend getting in contact with NXP Support directly:https://www.nxp.com/support/support:SUPPORTHOME