Keil forum Using 74LVC4245's on a data bus

State Not Answered
Locked Locked
Replies 2 replies
Subscribers 22 subscribers
Views 850 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Using 74LVC4245's on a data bus

Mike Mcpherson over 20 years ago

Im using these to inface a 5V processor with 3.3V memory. Just wondering if anyone has any tips/advice they might have learned from past experience.

Parents

0 Mike Mcpherson over 20 years ago in reply to erik malund

Thanks Eric.........it looks as if all the parts other than memory are either 5v or 3.3V and 5V tolerent. So I dont have to worry about much........As far as caps, I always put one next to every VCC.
Cancel
Vote up 0 Vote down

Cancel

Reply

0 Mike Mcpherson over 20 years ago in reply to erik malund

Thanks Eric.........it looks as if all the parts other than memory are either 5v or 3.3V and 5V tolerent. So I dont have to worry about much........As far as caps, I always put one next to every VCC.
Cancel
Vote up 0 Vote down

Cancel

Children

No data