I have a MCB1700 board and i want to control its LEDs via pc via
TCP/ip.in order to do it i used LEDswitch program but i read the help
and it suggests to use a specific windows application for control the
LEDs via LAN cable and pc.in this case the board is a server and PC
is a client.
How can i find this windows application ?
can i use command prompt window instead of windows application?if yes
please help me how to use it.
Also please give me some help for configuring my LEDswitch program
codes on my board.
Andrew I think when i can run HTTPDemo with the LAN cable it
indicate that my LAN cable and hardware is fine and my problem is
refer to software.why you suggest to use another type of cable?
Yes, that seems a fair conclusion.
But it's getting a bit confused as to what you've actually tried -
I don't think you mentioned having had HTTPDemo working at the time I
first asked the cable question, and it's been really hard to get an
answer from you that indicated that you'd properly considered the
type of cable necessary.
Yes Andrew i mentioned about working with HTTPDemo project and
could run it on my board simply with LAN cable.but i think i have to
write my own C# socket server because couldn't use C++
code(LEDSwitch.exe) and have problem with it
Before writing anything yourself, I would recommend that you use
to test whether there is a PC or network configuration