I have a MCB1700 board and i want to control its LEDs via pc via
TCP/ip.in order to do it i used LEDswitch program but i read the help
and it suggests to use a specific windows application for control the
LEDs via LAN cable and pc.in this case the board is a server and PC
is a client.
How can i find this windows application ?
can i use command prompt window instead of windows application?if yes
please help me how to use it.
Also please give me some help for configuring my LEDswitch program
codes on my board.
Before writing your own, have you tried ready-made ones; eg
Do you have a basic (at least) understanding of how IP networks
Yes i familiar with ip network .also i have written a client and
server socket program with C# and also i wrote a client socket
program for android device and i can communicate with android device
and my laptop and i would like to do the same with android device and
but in LEDSwitch.exe when i change the P2 value i have error(Couldn't
connect.Please check the TCP/IP setting of your PC)
So you should be familiar with some tools & techniques for
debugging IP network issues - what have you tried?
In particular, what have you done to determine whether this is a
PC issue, an IP issue, or an issue at the mcb1700 end?