hi all, pls help me with writing & reading & erasing of Compact Flash Cards. all suggetsions, links, codes are welcome. thanx in advance, rgds, kaushik
I was thinking more in terms of replaceable storage for some single gadget. But for an applicaton like a data log, you'll probably want to read the data somewhere other than the logging device, which means more software and drivers for the reading device. For a linear card, I wouldn't be surprised if you could just buy a reader and some software to dump an image onto your PC, though. Or you could just use an ATA card in the first place, buying a PC CF reader (they're about $15-$30), and just reading the files directly on the PC. http://shop.pcconnection.com/web/Shopping/Product.htm?NRMODE=Published&NRORIGINALURL=%2fweb%2fShopping%2fProduct%2ehtm%3fproduct_id%3d361511&product_id=361511&NRNODEGUID=%7bC03E868D-1CEF-4F98-8F00-45BF12FCEA4E%7d&NRQUERYTERMINATOR=1&cookie%5Ftest=1 http://www.amazon.com/exec/obidos/tg/detail/-/B0000633DU/102-2901789-8907353?v=glance This reader is kind of interesting because the picture makes it obvious just how much the CF card looks like an ATA disk drive. Pretty much just connect the wires on your IDE cable, and you're good to go. http://www.pretec.com/index2/product/Accessory/IDE_CF_reader.htm Probably more pain and suffering to get the file system and ATA interface code running on the 8051 device, though. Does anyone know of an off-the-shelf solution for that problem?