How can I using C Compiler in order to communication between 8051 with PC via serial port using RS232. I want to have an Example for Keil C for 8051 and an example Visual basic for Receive/transmitter on PC.Thank You very much.
I Am Iranian Boy And In This Country We Dont Have Enough Refrence Please Help Meeeee huh? If you have internet access, you can get almost any reference you could possibly require! What is your actual question?
salam vahid, adrese khodet ra baraye man beferest. Ma bayad ba hamdigar tamase mostaghim dashte bashim. Shoma dar kodam shahr zendegi mikonid ? Kodahafez
salman khan, Did you actually read Stefan's post of 1/23/03 3:45:18 which appears immediately above yours?
"AND 4. a 232 interface chip such as the MAX232 to interface with the PC" Strictly, that is irrelevant to the 8051 UART - the UART just transmits a bitstream out of its Tx pin, and receives a bitstream on its Rx pin. Whether those bitstreams are on a direct connection to another chip, via an RS232 transceiver, via an RF link or whatever is entirely irrelevant to the operation of the UART. Of course, if you were foolish enough to connect RS232 signal levels (+/-12V) direct to an 8051 pin, you'd probably damage it...!
Hello To All People That Them Liking ((8051) . And So No Liking. My Name Is Mohsen Ilkhani (( Vahid Is My Nick Name )) And Looking For Good Friends All Of The Word. I Am Iranian Boy And ... My Enjoyement Is 8051,Hardware Designing And .... My Email Address Is v_Ilkhani@yahoo.com