• State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 22 subscribers
  • Views 2057 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

P89LPC932BA :Header file & Hardware activation of Boot loader for ISP

arjun pal

Hi
i am working with P89LPC932BA,
i am looking for header file supporting this chip,
i also want details for hardware activation of boot loader for this IC so
that i can download hex file to it via ISP.
Thanks.
Arjun

Parents
  • 0 in reply to arjun pal

    I would, very carefully and checking 3 times include the code for "break detect" in startup.a51. The chip as shipped from the factory should be so enabled and if you always have the break detect enable as start of your code, the break detect should work even when the latest version of your code does not.

    Erik

Reply
  • 0 in reply to arjun pal

    I would, very carefully and checking 3 times include the code for "break detect" in startup.a51. The chip as shipped from the factory should be so enabled and if you always have the break detect enable as start of your code, the break detect should work even when the latest version of your code does not.

    Erik

Children
  • 0 in reply to erik malund

    Hi erik
    I tried to burn in small hex file to LPC,
    fresh IC shipped from factory got programmed using break detect method with flash magic but when i tried to program same IC next time it was not programming at all,since i did not included break detect routine in my program.now i will have to program this IC using parallel eprom programmer,erik if u have header file for lpc then kindly forward to arjun_ram_pal@rediffmail.com

    Thanks
    Arjun