We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi all, Could someone please check the following behaviour of uVision 2.31 (C51 7.01)? If in the Options for Target... dialog you switch from the "Target" tab to the "Device" tab and then back to the "Target" tab, some of the options are lost. For example, if the device is a SAB80C517A from Infineon, the "Use On-chip Arithmetic Unit" and "Use On-chip XRAM" check boxes are unchecked. Thanks in advance, Jose
"The ESC key does not perform the 'Cancel' function; it is simply ignored :-(" True. I want to described that behaviour of Cancel button is same as ESC in another similar dialogues under Win32 because I have another W98SE language mutation than English and I hadn't been sure with English Win version (My "Cancel" is named "Storno"). Certainly, if ESC will perform the Cancel function it would be fine. "I tried it with the Triscend devices, and I had no problem so long as I didn't actually change the device" Triscend on my PC : if I apply my procedure above, it change Xtal to 40MHz and do unchecking of "Use multiple DPTR reg." and "Use On/chip XRAM" while "Memory model", "Code Rom Size" and "OS" give back previous settings what is same as for my Dallas,... . My conclusion is: Keil uV2 2.31 (W98SE) installation (on my PC !!!) change Xtal to max. and uncheck all device depended Check boxes. It all hold for first click to "Device Tab" and immediate click back to "Target Tab" only. Vaclav