I am trying to trace the OpenCL calls using the MGD V4.2.1 but I don't see any calls being traced.
I have done the setup both on the target and host side and able to trace the OpenGL calls using the same setup.
Setup I have done on my host and target:
adb remount
adb push "C:\Program Files\ARM\Mali Developer Tools\Mali Graphics Debugger v4.2.0\target\android\arm\mgddaemon" /system/bin/mgddaemon
adb push "C:\Program Files\ARM\Mali Developer Tools\Mali Graphics Debugger v4.2.0\target\android\arm\egl.cfg" /vendor/lib/egl/egl.cfg
adb push "C:\Program Files\ARM\Mali Developer Tools\Mali Graphics Debugger v4.2.0\target\android\arm\egl.cfg" /vendor/lib64/egl/egl.cfg
adb push "C:\Program Files\ARM\Mali Developer Tools\Mali Graphics Debugger v4.2.0\target\android\arm\armeabi-v7a\libGLES_mgd.so" /vendor/lib/egl/libGLES_mgd.so
adb push "C:\Program Files\ARM\Mali Developer Tools\Mali Graphics Debugger v4.2.0\target\android\arm\arm64-v8a\libGLES_mgd.so" /vendor/lib64/egl/libGLES_mgd.so
adb shell chmod 777 /system/bin/mgddaemon
adb shell chmod 777 /vendor/lib/egl/*
adb shell chmod 777 /vendor/lib64/egl/*
adb shell ln -s /vendor/lib/egl/libGLES_mgd.so /vendor/lib/egl/libGLES.so
adb shell ln -s /vendor/lib64/egl/libGLES_mgd.so /vendor/lib64/egl/libGLES.so
adb forward tcp:5002 tcp:5002
After doing all these setup I am able to run the mgddaemon on the host side and able to connect host to target but can't see any OpenCL calls in MGD.
I am using the 64bit kernel and 64bit Android M and application that I am using to trace for tracing the calls is Opencl-X Benchmark.
Need help to figure out what I am missing so that I can trace the calls?
Thanks Pete for you response. I am curious that if there no standard OpenCL library in the Android then how will MGD be able to trace the OpenCL application.
In my case both OpenGL and OpenCL are build into one single libGLES_mali.so. I have linked my OpenCL application to this lib and trying to run it from the Android Shell but not able to get any traces in the MGD because as you mentioned there is no symlink.
I am not sure what and where to create the symlink. Need help with the same.
Regards
Virender
You can't link against libGLES_mali.so directly when trying to insert a layer driver - you need to create an intermediate name to bounce the redirection off.
The process needs to be something like this:
When building your application:
When running your application normally:
When running your application with MGD:
Let me know how that goes.
Cheers, Pete
Thanks Pete for your suggestion. Its working for me now. I am able to get the API trace in the MGD with above steps.
Cheers