Hi,I want to use network on FVP, I added "--network=nat" when starting the FVPbut there was not an ip addr when I booted into the kernel, ifconfig shows as below:
FVP host is ubuntu-16.04 inside VirtualBox
I am not familiar with network. is there anyone can help me ? thanks a lot!
I would recommend updating the model to the latest version (from https://developer.arm.com/products/system-design/fixed-virtual-platforms, it will be verison 11.2) but I doubt this is causing your issue, it is much more likely to be a SW issue.
I've followed the same instructions and had the same output, so I can confirm you are not doing anything wrong but network support on this particular SW stack is not working.Based on the fact that the configuration does not allow for the --network option to be provided by default, I would assume this configuration has not been tested and is not the purpose of this script.
If you really need this SW stack, I would suggest contacting Linaro, otherwise you could use the SW stack described in https://community.arm.com/dev-platforms/b/documents/posts/using-linaros-deliverables-on-an-fvp .
Regards,
Simon