• State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 21 subscribers
  • Views 3141 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Fatal error: invalid -march= option: `armv4t'

bradn

when attempting to use arm-none-eabi-gcc I get an "invalid -march=" option error message.  This occurs when no -march option is specified or any of the valid march options are specified.

arm-none-eabi-gcc -c test.c
Assembler messages:
Fatal error: invalid -march= option: `armv4t'

arm-none-eabi-gcc --version
arm-none-eabi-gcc (Arm GNU Toolchain 13.2.rel1 (Build arm-13.7)) 13.2.1 20231009
Copyright (C) 2023 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

arm-none-eabi-gcc was obtained from the following link:

developer.arm.com/.../arm-gnu-toolchain-13.2.rel1-x86_64-arm-none-eabi.tar.xz

I'm using an amd x86 linux RH8 system. I assume it's some sort of setup issue 

Any pointers on how to resolve would be appreciated.  Thanks.