CMSIS-RTOS2 Blinky Example

This 'Blinky' project is a simple CMSIS-RTOS2 Keil RTX5 based example for ARM 'Musca-S1 CM33 #0' device using ARM 'V2M-Musca-S1' Evaluation Board.

Compliant to Cortex Microcontroller Software Interface Standard (CMSIS).

Example functionality:

  • Clock Settings:
    • XTAL    =          50.00 MHZ
    • SYSCLK  =          50.00 MHz
  • one LED is blinking with a fixed speed. No sleep used.

The Blinky program is available in different targets:

  • Debug:
    • Compiler optimization Level 1
    • Keil RTX5 variant 'Source'

Debug (eMRAM) Debug (SRAM)
code: eMRAM code: SRAM
data: SRAM data: SRAM

Configure the board's BOOT switch to "MRAM".

Related
Recommended