Cost-effective CPU Module for Atmel ATSAMA5D2 Processors

The MYC-JA5D2X CPU Module is a core controller board powered by Atmel SAMA5D2 which is a high-performance, ultra-low-power ARM Cortex-A5 processor based MPU and runs up to 500MHz, supporting multiple memories, including the latest generation such as DDR3, LPDDR3, and QSPI Flash. It is an embedded processing card with integrated 256MB DDR3 SDRAM, 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM and Ethernet PHY and can be easily embedded into your next design. It has been designed to support up to 512MB DDR3 and 1GB Nand Flash (or 16GB eMMC Flash) on customer demand. With the SO-DIMM I/O expansion connector, a number of I/O signals are available to enable your base board extension and implement more functions and flexible configurations based on customer demand.

The Atmel SAMA5D26 and SAMA5D27 processors are compatible to be used on the MYC-JA5D2X CPU Module. MYIR delivers the module with 5D27 device by default. The module is capable of running Linux 4.1 and can support -40 to 85 Celsius working temperature range for industrial embedded applications.






2 (2 Hosts or 1 Host/1 Device)

3 (2 Hosts/1 HSIC or 1 Host/1 Device/1 HSIC)










MYIR offers a development board MYD-JA5D2X built around the MYC-JA5D2X CPU Module and has extended various peripherals through headers and connectors on the base board including serial ports, USB Host and Device ports, one CAN port (only for SAMA5D27), one 10/100Mbps Ethernet port, RS485, TF card slot, Audio in/out, LCD, etc. It is a good reference design for development based on Atmel SAMA5D2 MPUs.

MYD-JA5D2X Development Board