Now, I've a DS-5 debug tool and a J-link emulator, but I don't know how to connect the J-link to the DS-5.  Can anybody help me?

thanks.

I'm trying to migrate a bare metal ARM project, that was previously built with GCC (arm-xilinx-eabi) and Autotools, over to DS-5 armcc toolchain.  Does anyone have a working example of using Autotools (autoconf / automake) with armcc, armlink, armar,…

On Cortex-A9, after power on reset BootROM code is executed and this is responsible for configuration of boot media, copy first stage boot loader to on chip memory etc....

I would like to understand the BootROM code flow using step by step procedure(to…

1. ARM Compiler 6 uses armclang, but armclang can't use the intrinsic functions(like __qadd) that has used in the previous compiler.How can I get the optimization code? (Does the intrinsic functions are better than the our codes,what are the codes in the…

Hi,

I am profiling my C application running on an ARM target. DS-5 streamline analyzer is run on a host machine.

Data is captured from ARM target board using gator daemon.

I am getting following entries in Call paths view which contribute to most of the…

Could I get the exactly schedule count in DS-5? As I knew DS-5 working use snapshot, but someone inform me that is worked using interrupt. So he told me we can get schedule information.

Is this right information? Then how can I check schedule information…

I have input files called rin.pcm and sin.pcm. If i place them in the workspace and run my project. There is an error that the files cannot be found. Then I found that there is a specific path which the environment decides where the input files need to…

Hello,

I'm using DS-5 streamline to analyze some action on my board. after some testing i closed the program and next day when i opened it the eclipse stopped responding. it load the timeline view up till 99.9% then every thing freeeez. this problem happened…

Hi,All,

     I first contact DS-5 streamline profiler.  I know that the streamline get the data from gator daemon through network. I am curious that what format the gator daemon's data is?  XML? or...

Hi,

Can anyone help me in porting ARM code which is compatible in Development Studio 5 to  GCC platform?

Please help me in identifying how Macro and global directives are defined in GCC platform?

Thanks

Hi,

I get the error message as below for a bare metal debug

### prints from the command window

interrupt

ERROR(TAD9-NAL52):

! Unable to stop device Cortex-A9

! Cannot attain state requested.

More information: http://ds.arm.com/msgcode/ds5/ME-TAD9-NAL52

###…

Hello, ARMer,

I am following Mr. Theobald's blog: UEFI Debug Made Easy to run an UEFI BIOS on a FVP of ArmVExpress-RTSM-A9x4. But when building, an error is always reported as below:

17:42:45 **** Incremental Build of configuration Default for project…

We have a program with many obj and when we invoke the linker gives us this error: Argument list too long

We environment is:

ARM DS-5 Professional Edition

Version: 5.19.1

Build number: 5191005

ARM1176JZF-S

I am seeing a failure to connect to the DSTREAM debugger from DS-5 version 5.20

Just upgraded the debugger firmware to 4.20 which came with this DS-5 version.  When I double-click to connect I get this error.  Can't find any history on this problem.  Anyone…

I have the DS-5 with Dstream, and I want to do a boundary scan to find the stage of every pin, how do I do that? and where can I find the manual for this?

1

1

One of the errors I see:

Plug-in com.arm.debugger.ux was unable to load class com.arm.debugger.views.control.ControlView.

I installed 5.20 as an upgrade to 5.17 and it seems as if none of the plugins will work now.  Can't open up Debugger view, etc.…

Hi everyone!

I am using arm ds-5 professional under evaluation license, and I am trying to collect call-graph info from my test application under arm via streamline, but faced with issue.

Collected call graph is flat, there is no hierarchy

But it should…

Hi ,

I have purchased  Inforce6540 (Inforce6540). I want to do bare-metal debug with ARM DS-5. Is any one knows, Whether ARM DS-5 have Inforce6540 (Snapdragon 805, Cortex-A15) bare-metal support?

Best Regards

Sreenath P V

I have compiled a simple "Hello World" program on DS-5 ultimate evaluation version and couldn't find a bare metal FVP on which I can run it. When I select "ARM FVP->VE_AEMv8x1->Bare Metal Debug->Debug ARMAEMv8-A" in "Connection" tab of "Debug Configuration…

Hello, I am working on DS-5 Professional edition Evaluation version. Where will be a file will get opened if following C code is executed  fp = fopen("read.txt", "wb"); ?. I meant know in which directory and How can we specify relative path setting in…

Hi,

I recently discovered DS-5 community edition and found it very useful for displaying the scatterload file in graphical format via the Regions/Sections tab. My only gripe is there is no way to customize what is shown and I cannot export this data to…

Dear Ronan,

   We recently got a Juno board. We sucessfully done the setup for android on that.(using the steps given in Setting up Android on Juno)

We are working on some multimedia application, which we want to port it to juno and see the performnace…

Hi,

How to calculate MCPS using Streamline data?  

Regards,

abhishek

Hello, I post here a question I have made already, but probably this is the right forum,

since I have not received answer till now.

I need some clues (better if it is a code example) about how to set up triggers in a way that a trace

disable in a core…

Hello,

    I have downloaded and installed DS-5 v5.19.1 professional 64 bit on Ubuntu 12.04 (amd64) today. I also applied for an evaluation license, and tried to build the example "startup cortex-A9" project, but I got an error message "C9932E: Cannot…