We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Would anybody be so kind to send me the sample code for nxp K60DX256VLL10 to communicate with PCA9698 over I2C protocol to turn led on/off for bank 0?
A helpful reference is the Blinky example project offered by the Pack Installer of MDK 5
as they're both NXP parts, then NXP would seem the most likely people to ask ...
https://community.nxp.com/
This is not an example of I2C. I am new to I2C protocol and trying to turn on/off LED connected to bank 0, pin 0. Would there be any code whihc I can use as reference for I2C or atleast guide me how to configure PCA9698 for turning LED on/off ? What would be the sequence of device (slave) address, output configuration register and command register for output?
HASEEB said:Would there be any code whihc I can use as reference for I2C
That would come from the NXP - not ARM or Keil.
https://community.arm.com/developer/tools-software/tools/f/keil-forum/43684/lpc2148-timer0-not-working-as-expected/158950#158950
Have you studied the documentation for the K60DX256VLL10 and the PCA9698 ?
HASEEB said:What would be the sequence of device (slave) address, output configuration register and command register for output?
That would be in the PCA9698 documentation