Good morning everyone
I'm in the project of evaluating if Keil support USB High Speed functionality for the processor STM32F437.Was somebody able to create a project with Keil with such processor and used the high speed USB
I need to proof that the 480 Mbs are supported. The 12 Mbs of full speed are not enough for my purposes.
Any help is much appreciated.
Thanks a lot in advance,
Stefano
Hi Stefano.
USB HS is working on http://www.keil.com/mcbstm32f400/ there is also an example using MDK-Middleware there.
The STM32F437 is just a microcontroller with some additional features in comparison to STM32F407IG which is on the Keil MCBSTM32F400 Evaluation Board.
You can also see the schematic of this board here: http://www.keil.com/mcbstm32f200/mcbstm32f200-schematics_V1.2.pdf and in this case there is external ULPI for HS, it is the IC6 (STULPI01B).
The conclusion is, yes, USB HS works on this MCU.