I'm new to the ARM-world and want to program an ATSAM3U4C.
My problem is to adjust the correct clockspeeds because the data sheet is really complicated.
Is there anyone who could tell me what I have to program to get the PLL to 96MHz?
>>My problem is to adjust the correct clock speeds because the data sheet is really complicated.
Usually just some multiplication and division at the end of the day, with some attention to comparison frequency and maximum VCO frequency.
Perhaps look at some other example code, not a part I'm using. Paste in the default clock setting code for review.
by following the instructions in the datasheet I'm not getting the PLL working correctly.
I know that the settings are "just" multiplications or divisions, but it seems that the datasheet is missing information about that procedure.
I do not have any example code other than the ASF from Atmel and this code is so confusing...
So I would be thankful for a concise help.
All other functions (Timers, External Interrupts etc.) are working fine.
View all questions in Keil forum