Warning when declaring variable: 'Variable not used'

I'm trying to initialize I2C peripherals on my STM32 Discovery board and this is the function I've created to do so -

void I2C2_Initialize(void)
{

NVIC_InitTypeDef NVIC_InitStructure;
I2C_InitTypeDef I2C_InitStruct;

        I2C_InitStruct.I2C_ClockSpeed = 100000;
          I2C_InitStruct.I2C_Mode       = I2C_Mode_I2C;
          I2C_InitStruct.I2C_DutyCycle  = I2C_DutyCycle_2;
  //I2C_InitStruct.I2C_OwnAddress =
          I2C_InitStruct.I2C_Ack        = I2C_Ack_Enable;
        I2C_InitStruct.I2C_AcknowledgedAddress =  I2C_AcknowledgedAddress_7bit;

        I2C_AcknowledgeConfig(I2C2, ENABLE); //Enable Acknowledge for I2C2
        I2C_ITConfig(I2C2, I2C_IT_EVT, ENABLE); //Enable Event Interrupt Mask for I2C2
        I2C_Cmd(I2C2, ENABLE); //Enable I2C2 peripherals



                //! \Enable the I2Cx Interrupt
        NVIC_InitStructure.NVIC_IRQChannel = 33; //I2C2_EV_IRQn  #33 to enable I2C interrupt
                NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 5;
                NVIC_InitStructure.NVIC_IRQChannelSubPriority = 5;
                NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
                NVIC_Init(&NVIC_InitStructure);

}

I get the warning - #550D: variable "I2C_InitStruct" was declared but never used
This didn't come up in previous compilations. If anyone could help me with this it will be very much appreciated.

Parents Reply Children
No data
More questions in this forum