lpc2148 not running 60 mz slow

I am using Realview (evaluation) and have the following program for LPC2148:

#include <LPC214x.h>
#define LED 0x01000000
main() { IO1DIR |= LED; //use P1.24 for(;;){ IO1CLR |= LED ; IO1SET |= LED; }
}

the crystal is 12M and multiple factor is 5, no VPB setup (i also tried VPBDIV=1). It means the system should run with CPU clock=60Mhz
The problem is the LED blinks only with 1 MHz.
I tried simulation but the time shown there still indicate that the LED blinks with frequency around 30Mhz.
This happen not only with the LED but with any code i put. It seems that my system runs with 2Mhz CPU clock. Does any one have the same problem, please help me. Thanks a lot.

we have same problem but we change mam numbers(startup.s) but nothing changed
what are correct value pll and mam or exct.i must see about 30 mhz

Parents Reply Children
No data
More questions in this forum