Hello, I have been working on MCBSTR9 kit. Now, i have a problem about in-application programming. i read the AN2475, and study on the project source. i tried to copy the source to Keil uVision3. i did followings to download and work IAP in bank1: ---------------------------------------------------- - *Boot Bank Size Configuration (BBSR) BBSize: Memory size 32KB BBADDR: Address 0x000000 *Non-boot Bank Size Configuration (BBSR) BBSize: Memory size 512KB BBADDR: Address 0x080000 - Options - ASM - Define, Define: BOOT_BANK1 - CSX (Chip Select Mapping) checked - options - target: IROM1: Start 0x000000 size 0x8000 (checked the box on right and left) IROM2: Start 0x080000 size 0x80000 (not checked) IRAM1: Start 0x4000000 size 0x8000 (checked the box on left) - STR91xFxx Flash Bank1 ICP STR91x CFG & Security ICP ---------------------------------------------------- Then it works from bank1 now. The menu (to download or execute) i can see 115200 baud, in hyper terminal. i hit "1", then i chose the .bin file, i start to send.. everthing goes ok till here. i take "Verification failed" error, i could not download the bin file. if anyone can help me ???
View all questions in Keil forum