8051+Keil+RTOS

Hi,

I have used Keil to complete a ADuc836(8051 core) product development. Now I am looking at another product with RTOS, by searching "8051 Chips Supported By Keil", I find only very few choice is available.

(1) Is anyone in the forum know how to use Keil and RTOS on 8051 ? Is any successful story ?

(2) Take CMX-RTX as an example. CMX-RTX says every task takes 28 bytes RAM, 8051 only have 128 bytes, how many tasks can create ?

(3) Take CMX-RTX as an example. We know Keil employ call tree to deal with function pointer, programmer has to manually tell Keil compiler the actually called function, If this is your code, you can do that, However, if function pointer used by CMX-RTX (actually it does)? How do I modify call tree for RTOS ? Do I have to do that ?

Thanks

Daniel

Parents
  • Is any successful story ?

    Yes. I have written an application using RTX51-Tiny. The application flew on the Space Shuttle and on the MIR. The 8051 was used to interface an IEE LCD-backlit push-button to a PC-104 ISA bus. The 8051 had 2 jobs: 1) receive commands from the PC, 2) constantly refresh the LCD on the button.

    It was possible to write this without an RTOS. However, I decided that I could do this easily with the RTOS using 2 tasks.

    The problems I have seen with using an RTOS is not the commercial RTOS but poorly-designed home-brew RTOS's.

    Jon

Reply
  • Is any successful story ?

    Yes. I have written an application using RTX51-Tiny. The application flew on the Space Shuttle and on the MIR. The 8051 was used to interface an IEE LCD-backlit push-button to a PC-104 ISA bus. The 8051 had 2 jobs: 1) receive commands from the PC, 2) constantly refresh the LCD on the button.

    It was possible to write this without an RTOS. However, I decided that I could do this easily with the RTOS using 2 tasks.

    The problems I have seen with using an RTOS is not the commercial RTOS but poorly-designed home-brew RTOS's.

    Jon

Children
More questions in this forum