DSTREAM-ST in DS5 Platform Configuration

Hi,

if i want to use "Platform Configuration" for DSTREAM-ST in DS5,

i recevive this "Scanchain detection failure: Detected number of devices = 1.024, maximum allowed = 1.023. This problem is usually a result of the scanchain not acting correctly when using JTAG scans to count the number of devices."

Can you help me please to resolve this problem.

I want to test Cortex M33 from NXP (MIMXRT685_EVK)

Thank you in advance.

AH

Parents
  • Hi Abdelillah

    Sorry to hear that PCE is not auto-detecting this board automatically.

    You don't say which version of DS-5 you are using, but DS-5 has been superseded by Arm Development Studio.  

    As a first step, I recommend that you try Arm Development Studio, which has improved auto-detection capabilities.  A free 30-day evaluation is available.  This will also update the DSTREAM-ST firmware.

    If that does not resolve the problem, please open a Support Case using the "Support > Open a Support Case" option at the top of this page, so that Arm support and engineering teams can properly investigate.

    Hope this helps,

    Stephen

Reply
  • Hi Abdelillah

    Sorry to hear that PCE is not auto-detecting this board automatically.

    You don't say which version of DS-5 you are using, but DS-5 has been superseded by Arm Development Studio.  

    As a first step, I recommend that you try Arm Development Studio, which has improved auto-detection capabilities.  A free 30-day evaluation is available.  This will also update the DSTREAM-ST firmware.

    If that does not resolve the problem, please open a Support Case using the "Support > Open a Support Case" option at the top of this page, so that Arm support and engineering teams can properly investigate.

    Hope this helps,

    Stephen

Children
More questions in this forum
There are no posts to show. This could be because there are no posts in this forum or due to a filter.