Starting to work in REALVIEW PLATFORM BASEBOARD FOR ARM1176JZF-S ( SOFTWARE ARM DS -5 TOOLS)

I AM WORKING FIRST TIME IN ARM BOARDS. PLEASE GIVE ME THE STEPS OF RUNNING A C PROGRAM IN ARM1176JZF-S WITH ARM DS-5 TOOLS( THE LICENSE OF WHICH I HAVE AND WHICH IS ALREADY INSTALLED IN MY PC ) .I HAVE INSTALLED THE REAL VIEW SOFTWARE PROVIDED IN THE CD WITH THE BOARD. I HAVE BEEN ABLE TO RUN C PROGRAMS  IN ARM FVP ( IN ARM DS-5 TOOLS AND BARE METAL EXAMPLE PROGRAMS AND LINUX BASED PROGRAMS ( IN DS 5 TOOLS) . I HAVE CONNECTED WITH IT THE POWER SUPPLY( RED LED GOT ON) THEN AFTER PRESSING STANDBY BUTTON MANY LEDS TURNED ON. I HAVE CONNECTED TO PORT 1 THE USB( WHICH IS NOT GETTING RECOGNIZED( I. E. NO CHANGE IN MY COMPUTER)).

Parents Reply
  • PB1176_basic_connections.jpg

    The picture is of a PB1176 set up on a colleague's desk.  It shows the connections required to connect to the board for bare metal image load and debug using DS-5.  That is the power supply, and the debug connection via JTAG.

    A RVI/DStream unit is not bundled in with the board, you do need to purchase them separately.

    If you want to check the board is working, you could connect a serial cable.  The board has boot monitor which runs on power-up.  It gives access to features such as self test.

Children
More questions in this forum