DS-5 bare metal wait error after run "debug"

I tried to run the bare metal script ("Hello World ANSI C Project - ARM Compiler 5 DS-5 built-in") on DS-5 debug software. However, it hangs on somewhere on "wait" commands as below which is not yet reached the breakpoint on main function. Notes, it could not even proceed to the "Step Over Instruction (F6)".

Commands:

Stopping running target Altera - Arria 10 SoC on connection
Connected to running target Altera - Arria 10 SoC
Execution stopped in SVC mode at S:0x8001E748
S:0x8001E748 MOV pc,lr
cd "C:\Users\lab_pcgcpv\Documents\DS-5 Workspace"
Working directory "C:\Users\lab_pcgcpv\Documents\DS-5 Workspace"
Execution stopped in SVC mode at S:0x8001E748
S:0x8001E748 MOV pc,lr
loadfile "C:\Users\lab_pcgcpv\Documents\DS-5 Workspace\bare-metal-hello-world-02\Debug\bare-metal-hello-world-02.axf"
Loaded section APP_CODE: S:0xFFFF0000 ~ S:0xFFFF0BC3 (size 0xBC4)
Loaded section APP_CODE: S:0xFFFF0BC4 ~ S:0xFFFF0BD3 (size 0x10)
Entry point S:0xFFFF0000
Semihosting server socket created at port 8000
Semihosting enabled automatically due to semihosting symbol detected in image 'bare-metal-hello-world-02.axf'
set debug-from main
start
Starting target with image C:\Users\lab_pcgcpv\Documents\DS-5 Workspace\bare-metal-hello-world-02\Debug\bare-metal-hello-world-02.axf
Running from entry point
wait

Looking for helps :(

Parents
  • If you didn't already get this fixed, you need to change the memory locations for the Arria10 board.  The memory is at a different location.

    Try:

    OCRAM 0xFFE00000 0x40000
    {
    APP_CODE +0
    {
    * (+RO, +RW, +ZI)
    }
    ARM_LIB_STACKHEAP 0xFFE0C000 EMPTY 0x4000 ; Application help and stack
    { }
    }

Reply
  • If you didn't already get this fixed, you need to change the memory locations for the Arria10 board.  The memory is at a different location.

    Try:

    OCRAM 0xFFE00000 0x40000
    {
    APP_CODE +0
    {
    * (+RO, +RW, +ZI)
    }
    ARM_LIB_STACKHEAP 0xFFE0C000 EMPTY 0x4000 ; Application help and stack
    { }
    }

Children
No data
More questions in this forum