You are currently reviewing an older revision of this page.
Musca-A Links and Resources
Build an ILP32 user-space
MPS3 FPGA Prototyping System
Tutorial: Debugging Arm Trusted Firmware using DS-5
MPS2(+) Mbed OS automated testing
FAQ: FPGA Prescale register address incorrect in MPS2 software header file
FAQ: Why is my Juno board hanging and/or powering down in U-Boot / EDK2 UEFI?
Running uCLinux on the Arm MPS2(+) platform
About the MPS2 M-class prototyping system
FAQ: How can I run an OP-TEE Trusted Application (TA) on Juno?
Linaro Release Notes 17.10
Instructions for using Linaro's deliverables on Juno
Release notes for older Linaro releases
Instructions for using Linaro's deliverables on TC2
Instructions for using Linaro's deliverables on an FVP
Instructions for using mbed with Beetle
Support, FAQs, & tutorials for all supported ARM-supplied development platforms
FAQ: How do I debug Beetle using DS-5?
Working with ARM M-Class development platforms
Instructions for configuring Keil MDK for Beetle
Instructions for using Energy Aware Scheduling (EAS) on Juno (Linaro Release 16.06 and older)
Useful Links for Beetle platform
Instructions for booting Debian on Juno (16.02 onwards)
FAQ: How do I TFTP boot the Linux kernel on Juno?
FAQ: How do I drive the emulated and real LEDs in mbed code on Beetle?
FAQ: What are the differences between the Linaro lsk-armlt and latest-armlt kernels?
Instructions for using System Suspend to RAM on Juno (Linaro Release 16.05 onwards)
EDK2 UEFI in Linaro Release 16.02 onwards
Tutorial: Energy monitoring on Juno
FAQ: How can I power up different CPUs?
FAQ: How do I change which CPUs are released out of reset and which one is the primary for baremetal development?
Tutorial: Baremetal development on the Juno
FAQ: How do I pin a task to a particular CPU and fix the frequency?
Notice: ARM documentation error regarding Mali and OpenGL support in Linaro OpenEmbedded
FAQ: How do I connect to a Network File System (NFS) on Juno?
FAQ: How do I configure Trusted Board Boot (TBB) in Linaro builds for Juno?
Instructions for using the Linaro software deliverables
FAQ: How do I enable ethernet support on Juno?
FAQ: What are the differences between each revision of the Juno?
FAQ: How do I identify which revision of the Juno I have?
FAQ: Does Juno support PCIe?
Forlinx Arm boards comparison table.xls
Arm Interrupt handling for GIC controller(ACPI)
FAQ: How do I use a different version of Arm Trusted Firmware with the Linaro deliverables?
FAQ: Why am I having problems connecting a debugger to the Juno in DS-5?
FAQ: How do I use older Linaro deliverables?
Arm Development Platforms - Links
Juno Software Binary Images
FAQ: General troubleshooting on the Juno
Arm Development Platforms - Ask a Question
Boot an arm64 kernel on the Juno r1 platform
FAQ: How do I control the number of running CPUs?
FAQ: How can I use Device Tree to alter the number of CPUs available to Linux?
FAQ: What is Device Tree?
FAQ: Where can I find DS-5 debug configuration files for the Juno?
Tutorial: Running Bare-Metal code at EL3 on the Juno board
Juno Software EULA
How to be Notified of Juno Updates
FAQ: How can I prevent the Juno from hanging when I disconnect a DS-5 debug session?