This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cortex-M3 DesignStart FPGA-Xilinx edition package bitstream incompatible on Arty A7-100T

Hi, there

I just downloaded  the "Cortex-M3 DesignStart  FPGA-Xilinx edition packag" and tried to load the bitstream up to Arty A7-100T , but got error

"Incorrect bitstream assigned to device. Bitfile is incompatible for this device"

I think this package maybe created for Arty A7-35T, so it is possible does not work. 

Is there a way to modify it to make it work on Arty A7-100T?

Thanks

Parents
  • I finaly found out I can change the board selection in Vivado.  After selecting A7-100T board it works good.

    I can program the A7 board now and see the leds flashing and message displayed on Putty.

    Problem solved.

Reply
  • I finaly found out I can change the board selection in Vivado.  After selecting A7-100T board it works good.

    I can program the A7 board now and see the leds flashing and message displayed on Putty.

    Problem solved.

Children