This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Timer not working in stm32f401re

i want to setup timer in STM32F401RE and i already have this code:


int main(void) {
TIM1_init();

while (1) {}
}


/// initialize TIM1
/// timer TIM1 channel 2 is configed to generate PWM at 1kHz. the output of the
void TIM1_init(void) {
RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN; // enable GPIOA
GPIOA->MODER |= (1 << 19); // PA9 to alternate function
GPIOA->AFR[1] |= (1 << 4); // timer output mode
RCC->APB2ENR |= RCC_APB2ENR_TIM1EN; // enable tim2

TIM1->CCMR1 |= (1 << 11); // enable preload
TIM1->CCMR1 |= (1 << 6) | (1 << 5); // PWM mode 1
TIM1->CCER |= (1 << 4); // Capture/Compare 2 output enable.

TIM1->PSC |= 160 - 1;
TIM1->ARR |= 100 - 1;
TIM1->CNT |= 0;
TIM1->CCR2 = 50 - 1;

TIM1->CR1 |= 1;
}


currently the timer wont work:


is there any problem in my code?

Parents Reply Children
No data