I have tryed to make SWD connect to Cortex-M0 DesignStart Eval by STLink2, but it was unsuccessful.
The SW Device showed information as this picture.
I chose AHB_ROM_FPGA_SRAM_MODEL and AHB_RAM_FPGA_SRAM_MODEL be the MYM_TYPE
Thank you so much~
I solved it.
The siganl connection is different from M3Eval.
I'v changed the connection, that was mcu_sys's SWDIOTMS via pin_mux's SWDIOTMS direct connect. I connected CDBGPWRUPREQ to CDBGPWRUPACK.
Finally, I got the SW-DP with ID 0x0BB11477 with DEBUG function!
There are something worng with DEBUG, but I got it at least.
Thanks for your help!
The best wishes!