After compiling the MPS2+ FPGA designstart project (unmodified, as-is out of the box), i'm failing to run it on the FPGA.
While the already downloaded image that arrives on the FPGA runs fine (i run the demo application), the image I compiled fails to run. After the FPGA configuration finishes the LCD remain blank, all the leds are constantly lightened and the LOG.txt (in the root directory of the board) shows the following message: "SMSC9220 initialisation failed."
Also, i see the following messages in Quartus:
I'll appreciate your advice.
I haven't changed any file.
I've done the following steps (unchanged Designstart out of the box project):
1. Installed CMPS3.0 on my Windows
2. Copied the CMPS3.0 to my Linux
3. Entered the synthesis directory
4. Launched Quartus (15.1 with PR license), loaded the SMM_M0DS_AN387.qpf project and run compilation
5. Run TCL script
6. Copied RBF to the FPGA
Regarding version 03 vs. 04 - the TCL script produces the file with extension _03. As I understood from the "Cortex-M0 Dwsignstart FPGA prototyping kit" PDF, the extension is just for my tractability of images on the FPGA. Am I wrong? Should I change the version of the encrypted file?
Have you copied the Recovery image from CMPS3.0 onto your board (following the "System Recovery" instructions in the CMPS Getting Started guide).
I downloaded the base image (*.rbe) from CMPS3.0 to the FPGA and it worked.
Indeed the base image that we received with the board is incompatible with CMPS3.0 user partition.
That's good to hear.
Indeed good news, thanks for your support!
Just a followup question:
Are the clock related warnings in my screenshots are expected? Should I ignore them?
The warnings are expected, they're mostly a side effect of the way that clocks are used for the PR flow.
this is what I get using the CMPS_3_1 files: