Hi,
After compiling the MPS2+ FPGA designstart project (unmodified, as-is out of the box), i'm failing to run it on the FPGA.
While the already downloaded image that arrives on the FPGA runs fine (i run the demo application), the image I compiled fails to run. After the FPGA configuration finishes the LCD remain blank, all the leds are constantly lightened and the LOG.txt (in the root directory of the board) shows the following message: "SMSC9220 initialisation failed."
All LOG.txt:2654.LOG.TXT
Also, i see the following messages in Quartus:
I'll appreciate your advice.
Thanks,
Eli
Hi Eli, I had one of the team look at the log.txt and it looks ok in that the images are loading but stalling probably because the user partition is non functional. Looking at your Quartos screen shot there are lots of clock warnings, have you performed any simulation of your design?
Can I just confirm you are using Quartos Prime (not the free web version) and you have already got the PR licence from ARM?
Thx
Liam