Hello together, I am little bit confused regarding to the Cortex-M0DS comparability to Altera FPGAs.
On one hand, according to the information out of the white paper An introduction to ARM Cortex-M0 Design Start it must be possible to run the Cortex-M0 DS on an Altera FPGA because the DesignStart DesignKit deliver a synthesizable Verilog Version of the processor.
On the other hand till now I only find Master Thesis or Step by Step Guides like (STEP BY STEP GUIDE TO IMPLEMENTING THE CORTEX-M0 USING A NEXYS2 FPGA BOARD) which uses development boards based on Xilinx FPGAs.
So my questions are:
Thank you and best regards