This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

将arm m0的配置参数ACG置0,RAR置1是否没有问题?

将arm m0的配置参数ACG置0,RAR置1是否没有问题?

  • 没有问题。

    ACG用来配置要不要要加clock gating? 等于0的话,就是没有clock gating,因此功耗大一点;配置为1的话,需要你手动添加clock gating cell

    RAG 为1,是代表所有寄存器都有reset pin